Seeking for a way to jazz up your wall art? Try out generating your have Do it yourself acrylic frames for individualized 3D artwork. This submit will stroll you by means of specifically how I designed these in my dwelling.
If you are hunting for a custom made way to body your images or artwork to make it stand out from the wall, these Diy acrylic frames are the excellent factor.
I landed on these frames since I desired a very little one thing to incorporate a minor further pizzazz to my toilet wall. 
We resolved to integrate my spouse&rsquos enjoy of golf into the mix by printing shots he took of PGA golfing programs he&rsquos played in black and white.
I adore when artwork is a conversation piece, so this was the perfect addition to the rest room wall.
To make it definitely stand out, I created these Do-it-yourself acrylic frames for every of the images.
In this article are the techniques I took&hellip 
Desk OF CONTENTS
- one. Get your products.
- two. Tape each and every facet of each individual corner.
- three. Mark wherever you want to drill your holes.
- 4. Drill your holes.
- 5. Use your glue dots to secure your photographs to the body.
- six. Mark the total on the wall in which you strategy to cling it.
- seven. Use your punch software to mark the full on the wall.
- 8. Drill your holes in the wall.
- 9. Screw the standoffs into the wall.
- 10. Connect your frame to the standoffs.
- eleven. Revel in the concluded item!
Disclaimer: This post does involve affiliate back links for your advantage. This is at NO additional charge to you but earns me a small commission. To read a lot more, test out our disclosure policy.
Very first matters initial, get all your elements. All sources for anything I utilised are connected below. I also integrated a checklist with back links of what we utilised to hang the frames, way too. 
FOR Creating THE Do-it-yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (just one for the dimension of the opening of your standoffs and one for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Resource (I utilized a Sharpie)
FOR HANGING THE Diy ACRYLIC FRAMES:
- Pencil
- Handheld Stage
- Punch
- Screwdriver
two. TAPE Just about every Facet OF Each and every CORNER.
Plexiglass/acrylic is extremely sensitive.
Due to the fact of this, you have to be very thorough when you are drilling the holes.
Placing a piece of painter&rsquos tape on either aspect exactly where you approach to drill your gap will support continue to keep the acrylic sheet from breaking or cracking when you drill.
I also retained the protecting address on every single aspect of the piece, as well.
three. MARK Where by YOU WANT TO DRILL YOUR HOLES.
After you have positioned the painter&rsquos tape on all 4 sides (or nevertheless numerous locations you program to drill a hole), you can spot a mark of exactly where you want to drill your hole.
I drilled my holes one&Prime in from just about every edge as you can see from the picture over.
4. DRILL YOUR HOLES.
Ahead of essentially drilling, double and triple examine that your marks are stage both of those horizontally and vertically.
You&rsquoll want to have these amount for when you dangle them. 
The drill bit you pick need to be massive more than enough to permit the standoff to in good shape within the hole.
I would do a examination operate on a piece of scrap product to make confident it is big plenty of. 
After you are certain that the marking are level and the bit is major ample, you want to begin drilling.
In this article is a good movie to stick to if you would like a demonstration on how to drill through acrylic.
You want to use about 50 percent electrical power when you are drilling.
Slow and constant. If you go to rapid, the acrylic will crack, so consider your time.
As you drill you really should see spirals of the acrylic little by little remaining taken off. 
Repeat the drilling for each hole you have to have.
five. USE YOUR GLUE DOTS TO Secure YOUR Photos TO THE Frame.
As soon as your holes are made, you can insert your photo to the piece of acrylic/frame.
The important in this article is to all over again, make confident your photo is stage just before you totally protected it to the frame.
The glue dots are extremely sticky and don&rsquot make it possible for for a lot of wiggle space, so it might be a good concept to line up a piece of lined paper driving the body to enable you line the edges of your photo.
Whatsoever trick works for you to make absolutely sure the picture receives glued to the frame level will do. 
6. MARK THE Complete ON THE WALL Where YOU Strategy TO Dangle IT.
As you start out to hold, mark your holes on the wall, but make confident your frame is stage.
If you measured properly in the action before drilling, the holes on your body really should already be stage.
If you are hanging a lot more than just one body like I did, make absolutely sure just about every frame is level in your grid, also. 
7. USE YOUR PUNCH Instrument TO MARK THE Entire ON THE WALL.
I like this instrument so significantly since it will get your hole began and enables your drill to keep in spot when you start drilling.
If you don&rsquot have one particular, I very advocate it!
8. DRILL YOUR HOLES IN THE WALL.
Be confident to use a bit that suits the screws that came together with your standoffs.
This will most very likely be a lesser little bit than the 1 you used on the frames.
I also utilised a stud finder to see if I essential drywall anchors, but simply because these frames are not that major, you could probably do without them.
9. SCREW THE STANDOFFS INTO THE WALL.
After you purchase your standoffs, you&rsquoll see how they do the job.
In purchase for the photo to &ldquostand off&rdquo the wall, you have to secure the standoff with the supplied screw right before attaching the photo to the standoffs.
As you can see from the image, creating certain almost everything is amount and measured effectively is tremendous essential. 
10. Attach YOUR Frame TO THE STANDOFFS.
The moment you&rsquove connected the standoffs, it&rsquos time to attach the images!
Line up the standoffs with your drilled holes and secure the standoffs.
If all goes properly, everything will line up correctly and be all set to go!
If you are like my dad and I, you&rsquoll occur across at the very least one that doesn&rsquot line up properly.
For this, we cheated a small little bit and secured the standoff to the frame and made use of a glue dot to safe it to the wall, so it didn&rsquot shift.
We only experienced to do this for two corners of two frames, but don&rsquot worry if you mess up 1&hellip We&rsquove been there! 
11. REVEL IN THE Finished Products!
Now it&rsquos time to love your get the job done!
We did a grid of 9 complete pics which was a big undertaking with all the measuring, but I&rsquom in like with how it turned out.
Let me know in the opinions what you assume of the finished product or service!